Pump Bearing

Product Details:

FEROFORM PR 18 is a high performance bearing material with excellent dry running capabilities at high load. Low friction properties & low wear rates are characteristics of this product.

Tenmat the leading composite bearing manufacturer introduce FEROFORM PR18 grade of self/water Lubricated pump bearing & neck/case ring.

Product Details:

A self-lubricating sintered bearing is a metallic component with high porosity (20-25% in volume), impregnated in a lubricant oil. The oil contained in the porosity provides a constant lubrication between bearing and shaft, so the system does not need any additional external lubricant.

Product Details:

Self / Water Lubricated Bearings for Horizontal & Vertical Pumps

Why FEROFORM is ideal for Pump Bearings ?

* ABRASIVE RESISTANT

* DRY RUNNING CAPABILITIES

* LOW FRICTION

* LOW WEAR, LOW SWELL

* HIGH COMPRESSION STRENGTH

* LOW SHAFT WEAR

* EASY TO INSTALL AND REMOVE

* EASY TO MACHINE

* RESISTANT TO CHEMICALS

* SAFETY AND HEALTH

* LOW THERMAL EXPANSION

* ENVIRONMENTALLY FRIENDLY

 

FEROFORM PUMP BEARINGS have exceptionally long life, toughness and are used in critical pumping applications TENMAT is the leading manufacturer of specialised, high performance, non-metallic engineering materials and components that are supplied to a broad cross-section of industrial applications throughout the world.

Pump bearings have critical application in many industries including chemical plants, power plants (nuclear, conventional and hydro), fire fighting etc. where reliable operation is essential because the cost of failure is too high. FEROFORM materials have proved their durability in these pumps and have become the first choice fitment for both OEM and next user refurbishment replacing bronze, lignum vitae, rubber, carbon and elastomeric bearings.

FEROFORM has Successfully in the following Pump types : Sea Water Pumps, Cooling water Pumps for Power Station, Fire fighting & Service Water Pumps, Irrigation & Portable Water Pumps, High Pressure bilge Pumps, Sewage purification plant pumps, Vacuum Pumps to circulating, ASH Slury disposal Pump, drain, Stock, dry Dock, Deep well, Drain water Lifting, Condensate Extraction Pump, Stages Pump, Submersible & Screw Lift, Eco Pump etc.

Additional Information:

• Production Capacity: Unlimited

Product Details:

FEATURES AND BENEFITSHigh wear resistanceHigh temperature resistanceExcellent dimensional stabilityLong lifeLow noiseLow water swellResistant to chemicalsLow wear on pump casing

Product Details:

NF22 grade have a resin bonded composite structure with added friction modifiers to give a controlled friction.

Nf22 have been the chosen bearing material for Submersible Pump applications offering low wear and friction rates.

Features & Benefits
Abrasion Resistant Longer Bearing Life
Can be Supplied as Split Bearings Reduced Maintenance Low Stick Slip Bearings Can Be Replaced
low water Swell vmhout Removal Of Shaft
Thermally Stable Reduced Shaft Wear

Product Details:

Self - Water Lubricated Bearing - Low Cost High Performance Bearing for Submersible Pump

Description:

 

Feroform range of composite bearings for Vertical Pumps and Sbmersible pumps. FEROFORM PR18 grades are self lubricating composites offering high performance for demanding application. Made from synthetic woven fibre which are impregnated with resins and friction modifiers, they offer high strength to weight ratio, low coefficient of friction and reduced stick-slip for a wide range of bearing applications including.

 

FEROFORM PR18 Self Water Lubricated Bushes Replaces - Rubber Cutlass Bearing, Bronze Bushes, Led Tin Bronze (LTB) Bushes, Glass Fill Teflon Bushes, Carbon Bushes, Carbon Fill Teflon Bushes.

 

FEROFORM PR18 has some unique advantages like -

• Excellent wear resistance
• High Compressive Strengh
• Low water swell
• Self lubricating (Can work Dry)
• Low coefficient of friction
• Tighter running clearances
• Long life
• Reduced stick slip
• Can work with most fluids
• Good chemical resistance
• Kind to counterface
• Very Good Dry Running Capabilities. It run dry till water reaches to top bearing.
• Low Coefficient of Friction
• Suitable for Sea Water & Abrasive working conditions.

Additional Information:

• Item Code: PR18

Product Details:

Shaft support bearings

• Can be lubricated with water or process fluids as well as grease or oil, reducing problems with lubrication lines during installation

•Able to survive temporary suspension of lubrication during start up or pump snoring reducing requirements to prime pump and maintenance Impeller support bearings

• Close running c earanees

• Low wear

• Can run dry temporarily Wear rings

• Close running clearances improve pump efficiency

• No damage is caused in the case of contact between wear ring and impeller or casing

Product Details:

AMKO bearings are easy to install and remove without the need for expensive equipment. Bearings can be easily installed on site with minimum effort and equipment, using simple mechanical methods.does not corrode and seize in bearing housings, unlike bronze and metal backed bearings which become difficult to remove.can be easily machined on standard metalworking or woodworking equipment. does not creep, deform or swell and can be machined easily to desired tolerances.

Product Details:

AMKO self lubricating composite bearing is ideal forVertical , Horizontal&Submersible Pumps.is the choosen bearing material in challanging pumping applications like Sea or Rawwater Contains abrasive particles. AMKOoffers very low wear & friction, negligible water absorption & low coefficient of thermal Expansion. AMKO is stable bearing materialinwetDry&Dirtyworking conditions.Pumpbearings have critical application inmany industries including chemical plants,power plants (nuclear, conventional and hydro),fire fighting etc. where reliable operation is essential because the cost of failure is too high. have proved their durability inthese pumps and have become the first choice fitment for both OEM and next user refurbishment replacing bronze, lignum vitae,rubber, carbon and elastomeric bearings

Product Details:

Amko is a composite material with nylon filament cured with phenolic resin added with friction modifier which offer very low wear & fricition, provides lomg maintenance free life of pump & bearing bush/ washer. Suitable For Sea water, Raw water and in abrasive working Conditions.

AMKO have successful applications in following pump types.:-

• Sea Water Pumps
• Cooling Water Pumps for Power Station
• Fire Fighting & Service Water Pumps
• Irrigation & Portable Water Pumps
• High Pressure Bilge Pumps
• Sewage Purification Plant Pumps
• Vacuum Pumps to Circulating ASH Slury
• Disposal Pump
• Drain Stock Dry Dock, Deep well Drain water Lifting Condensate Extraction Pump
• Stages Pump Submersible & Screw Lift Eco Pump etc.

AMKO Bearings has some unique advantages like :-

• Suitable for Sea Water & Abrasive working conditions.
• Very Good Dry Running Capabilities.
• It run dry till water reaches to top bearing.
• Excellent wear resistance High Compressive Strength.
• Low water swell.
• Self lubricating (Can work Dry).
• Low coefficient of friction.
• Tighter running clearances.
• Long life.
• Reduced stick slip Can work with most fluids.
• Good chemical resistance Kind to counter face.
• Low Coefficient of Friction L/D ratio The above permits:Typically 1:1 or 2:1.
• Adequate cross sectional area, to allow for shaft load.
• Ease of alignment.
• Adequate outside surface area for interference fit.
• Good pressure distribution.
• Allows a hydro dynamic film to develop.
• Experience shows that the shortest possible bearing should be used.

Product Details:

Low Cost High Performance Self / Water Lubricated Bearings For Submersible Pumps.

Low Self / Water Lubricated Bushes Replaces -

Rubber Cutlass Bearings,

Bronze Bushes,

Led Tin Bronze (LTB) Bushes,

Glass Fill Teflon Bushes,

Carbon Bushes,

Carbon Fill Teflon Bushes.

 

Benefits :

•  Dry running capabilities
•  Run with close running clearance, give less vibration, long bearing & shaft life
•  Successful self water lubricated Application in very abrasive working condition.
•  Easy to Machine & Install
•  Low wear & Low Friction

 

High Performance - Self / Water Lubricated Bearing for

 

PR 18

 

VT, Submersible Pumps & Motors

 

NF 21/NF 22

 

A high performance material with excellent dry running performance at highloads. Low friction properties and wear rates are characteristic of this product. Can be used with lubricants.

 

* Abrasion Resistant, * Thermally Stable, * Can be Supplied as Split Bearings,

 

* Low Stick Slip, * Low Water Swell

 

PR18 & NF22 Self Water Lubricated Bushes Replaces - Rubber Cutlass Bearings, Bronze Bushes, Led Tin Bronze (LTB) Bushes, Glass Fill Teflon Bushes, Carbon Bushes, Carbon Fill Teflon Bushes.

Product Details:

Since 1989, FOS has supplied oil seals and rubber molded parts worldwide for more than 30 years. FOS today provides customers with good quality and high performance Seals to meet customers' specfific requirements. With impelmeting QC management system and IATF-16949 certificated, FOS provides strict quality control, On-time delivery, Professional technical supports, Oil seals design proposal, and sealing solutions to satifify customers' needs and wants. Contact FOS with your sealing inquiries, that you may have. 

External Lip Oil Seals of Automotive Oil Seals

• All types are like general purpose types except external lip oil seals.
• Especially designed for sealing rotating housings, e.g. unitized seals, oil bath seals, cassette seals etc.

Dual Lip Seals of Automotive Oil Seal:

• With the spring loaded,  the primary lip retains the fliud in the rigs and preventing leakage.
• Secondary lip would exclude or block dirt entering the rigs.
• Applications which require two fluids from each other, e.g. used for separating ATF oil and differential gear oil.
• Selecting stainless steel spring or case for corrosive medium being sealed.

Flange Case Oil Seals of Automotive Oil Seals:

• Type J is reverse channel case to accommodate large clearances between the shaft and bore and added a flange and to provide additional strength.
• Type JG is shotgun cases existing a heavy outer flange to strengthen the case.
• There flange case provide the function of positioning the seal, minimizing cocking in the bore and early removing the seal from the bore.

Competitive Advantages:

• Good professional technology
• Experienced technical staffs
• Strict inspection procedures
• High quality and competitive prices
• On Time Delivery
• Problem identification & Solution offers
• Seal Design Proposal offers
• Seals tests for endurance and performance
• PPAP Level III submission
• International Standard Criterias

PTFE Lip Seals of Automotive Oil Seal:

• PTFE sealing lip for sealing aggressive media and sealing areas under high thermal stress.
• PVB1 has a single lip element that combines the low friction properties of PTFE with the flexibility of rubber.
• PBSC, PBTC are PTFE bonded lip seasls.
• Flexsible Ptfe lips with OD Case Assebmbling Seals / Bearings application / two lips Ptfe / three lips Ptfe

Product Details:

Flange Type Bushings:
These easy-to-mount standard flange bushings are used widely throughout the industry. They are available in grades to provide solutions to the most difficult bearing problems. These flange bushings are designed to handle both radial and thrust loads.

Product Details:

Sewage Treatment Plants
Victor Marine’s latest product the Sewage Treatment plant. using the latest technology to treat black and grey water.
Features: 

• No high speed moving parts which result in less maintenance and lower costs
• No delicate expensive membranes
• No cleaning cycles or back-washing
• Fully Automated PLC controlled system

Product Details:

Tank Washing Machines
Victor Marine’s Tank Washing Machines, marketed under the established brand name of Victor Pyrate, are of proven high quality and are efficient and robust.
Developing and manufacturing Tank Washing Equipment for over 60 years, Victor Marine has a wealth of knowledge and experience in providing tank cleaning solutions suitable for VLCC’s to smaller Product Tankers and Chemical Carriers.
Victor Marine can offer portable and fixed twin nozzle and single nozzle tank washing machines which set a standard above the rest and include the following design features:

• Jet lengths from 9 to 38m
• Wash cycle times as low as 16mins
• A range of both programmable and pre-programmable machines
• Available in Bronze and Stainless Steel
• Machines capable of operating at a pressure as low as 5kg/cm²
• Mud cleaning machines with a “sealed for life” gear box
• Fully Type Approved by Class Societies

Victor Marine can design the ideal system by carrying out a Shadow Diagram study which will confirm the number, position and type of machine so as to provide the optimum tank cleaning solution.
As well as supplying Tank Washing Machines, Victor Marine can provide all the necessary ancillary equipment to operate the tank washing equipment.

Product Details:

Tank Washing Machines
Victor Marine’s Tank Washing Machines, marketed under the established brand name of Victor Pyrate, are of proven high quality and are efficient and robust.
Developing and manufacturing Tank Washing Equipment for over 60 years, Victor Marine has a wealth of knowledge and experience in providing tank cleaning solutions suitable for VLCC’s to smaller Product Tankers and Chemical Carriers.
Victor Marine can offer portable and fixed twin nozzle and single nozzle tank washing machines which set a standard above the rest and include the following design features:

• Jet lengths from 9 to 38m
• Wash cycle times as low as 16mins
• A range of both programmable and pre-programmable machines
• Available in Bronze and Stainless Steel
• Machines capable of operating at a pressure as low as 5kg/cm²
• Mud cleaning machines with a “sealed for life” gear box
• Fully Type Approved by Class Societies

Victor Marine can design the ideal system by carrying out a Shadow Diagram study which will confirm the number, position and type of machine so as to provide the optimum tank cleaning solution.
As well as supplying Tank Washing Machines, Victor Marine can provide all the necessary ancillary equipment to operate the tank washing equipment.

Product Details:

Support bearings

• Low wear rate

• Closer clearances give a stable shaft and lower seal wear

Lantern rings

• Lowfriction gives ability to survive temporary suspension of lubrication water

• Dimensional stability allows for closely defined clearances to regulate waterflow

Impeller and casing wear rings

•  Low friction and low water swell allows smaller running clearances giving better pump efficiency